The Challenge of the bespoke: Design, Simulation and Optimisation of a Computationally Designed Plywood Gridshell

Martin Tamke; Gregory Quinn; Henrik Leander Evers; Anders Holden Deleuran; Christoph Gengnagel

The Challenge of the bespoke: Design, Simulation and Optimisation of a Computationally Designed Plywood Gridshell

Martin Tamke, Gregory Quinn, Henrik Leander Evers, Anders Holden Deleuran, Christoph Gengnagel

Publikation: Bidrag til bog/antologi/rapport › Konferencebidrag i proceedings › Forskning › peer review

Abstract

The Dermoid project, a series of three plywood grid shells, navigates at the interface between parametrically designed architectural spaces and the efficiency and resourcefulness of the simulations that are necessary in order to build them. It highlights the increasingly common challenges and conflicts which occur in building practice ranging from design to fabrication and highlights approaches that facilitate implementation in multiple scales of material, element and structure.

Originalsprog	Engelsk
Titel	In Fusion : Proceedings of the 32nd International Conference on Education and research in Computer Aided Architectural Design in Europe
Redaktører	Emine Mine Thompson
Antal sider	10
Vol/bind	2
Forlag	eCAADe (Education and Research in Computer Aided Architectural Design in Europe) and ITU / YTU
Publikationsdato	2014
Sider	29-38
Status	Udgivet - 2014
Begivenhed	The 32nd eCAADe Conference: Fusion - Northumbria University, Newcastle upon Tyne, Storbritannien Varighed: 10 sep. 2014 → 12 sep. 2014 Konferencens nummer: 32nd

Konference

Konference	The 32nd eCAADe Conference
Nummer	32nd
Lokation	Northumbria University
Land/Område	Storbritannien
By	Newcastle upon Tyne
Periode	10/09/2014 → 12/09/2014

Kunstnerisk udviklingsvirksomhed (KUV)

Nej

Adgang til dokumentet

http://papers.cumincad.org/data/works/att/ecaade2014_139.content.pdf

Citationsformater

Tamke, M., Quinn, G., Evers, H. L., Holden Deleuran, A., & Gengnagel, C. (2014). The Challenge of the bespoke: Design, Simulation and Optimisation of a Computationally Designed Plywood Gridshell. I E. M. Thompson (red.), In Fusion: Proceedings of the 32nd International Conference on Education and research in Computer Aided Architectural Design in Europe (Bind 2, s. 29-38). eCAADe (Education and Research in Computer Aided Architectural Design in Europe) and ITU / YTU. http://papers.cumincad.org/data/works/att/ecaade2014_139.content.pdf

Tamke, Martin ; Quinn, Gregory ; Evers, Henrik Leander et al. / The Challenge of the bespoke : Design, Simulation and Optimisation of a Computationally Designed Plywood Gridshell. In Fusion: Proceedings of the 32nd International Conference on Education and research in Computer Aided Architectural Design in Europe. red. / Emine Mine Thompson. Bind 2 eCAADe (Education and Research in Computer Aided Architectural Design in Europe) and ITU / YTU, 2014. s. 29-38

@inproceedings{ce3ea8f70db94d2fb7ba637f3daf24c6,

title = "The Challenge of the bespoke: Design, Simulation and Optimisation of a Computationally Designed Plywood Gridshell",

abstract = "The Dermoid project, a series of three plywood grid shells, navigates at the interface between parametrically designed architectural spaces and the efficiency and resourcefulness of the simulations that are necessary in order to build them. It highlights the increasingly common challenges and conflicts which occur in building practice ranging from design to fabrication and highlights approaches that facilitate implementation in multiple scales of material, element and structure.",

keywords = "Simulation, Bespoke Fabrication, Material Behaviour, Complex Modelling, Bending Active",

author = "Martin Tamke and Gregory Quinn and Evers, {Henrik Leander} and {Holden Deleuran}, Anders and Christoph Gengnagel",

year = "2014",

language = "English",

volume = "2",

pages = "29--38",

editor = "Thompson, {Emine Mine}",

booktitle = "In Fusion",

publisher = "eCAADe (Education and Research in Computer Aided Architectural Design in Europe) and ITU / YTU",

note = "Fusion : eCAADe Conference ; Conference date: 10-09-2014 Through 12-09-2014",

}

Tamke, M, Quinn, G, Evers, HL , Holden Deleuran, A & Gengnagel, C 2014, The Challenge of the bespoke: Design, Simulation and Optimisation of a Computationally Designed Plywood Gridshell. i EM Thompson (red.), In Fusion: Proceedings of the 32nd International Conference on Education and research in Computer Aided Architectural Design in Europe. bind 2, eCAADe (Education and Research in Computer Aided Architectural Design in Europe) and ITU / YTU, s. 29-38, The 32nd eCAADe Conference, Newcastle upon Tyne, Storbritannien, 10/09/2014. <http://papers.cumincad.org/data/works/att/ecaade2014_139.content.pdf>

The Challenge of the bespoke: Design, Simulation and Optimisation of a Computationally Designed Plywood Gridshell. / Tamke, Martin; Quinn, Gregory; Evers, Henrik Leander et al.
In Fusion: Proceedings of the 32nd International Conference on Education and research in Computer Aided Architectural Design in Europe. red. / Emine Mine Thompson. Bind 2 eCAADe (Education and Research in Computer Aided Architectural Design in Europe) and ITU / YTU, 2014. s. 29-38.

Publikation: Bidrag til bog/antologi/rapport › Konferencebidrag i proceedings › Forskning › peer review

TY - GEN

T1 - The Challenge of the bespoke

T2 - Fusion

AU - Tamke, Martin

AU - Quinn, Gregory

AU - Evers, Henrik Leander

AU - Holden Deleuran, Anders

AU - Gengnagel, Christoph

N1 - Conference code: 32nd

PY - 2014

Y1 - 2014

N2 - The Dermoid project, a series of three plywood grid shells, navigates at the interface between parametrically designed architectural spaces and the efficiency and resourcefulness of the simulations that are necessary in order to build them. It highlights the increasingly common challenges and conflicts which occur in building practice ranging from design to fabrication and highlights approaches that facilitate implementation in multiple scales of material, element and structure.

AB - The Dermoid project, a series of three plywood grid shells, navigates at the interface between parametrically designed architectural spaces and the efficiency and resourcefulness of the simulations that are necessary in order to build them. It highlights the increasingly common challenges and conflicts which occur in building practice ranging from design to fabrication and highlights approaches that facilitate implementation in multiple scales of material, element and structure.

KW - Simulation

KW - Bespoke Fabrication

KW - Material Behaviour

KW - Complex Modelling

KW - Bending Active

M3 - Article in proceedings

VL - 2

SP - 29

EP - 38

BT - In Fusion

A2 - Thompson, Emine Mine

PB - eCAADe (Education and Research in Computer Aided Architectural Design in Europe) and ITU / YTU

Y2 - 10 September 2014 through 12 September 2014

ER -

Tamke M, Quinn G, Evers HL , Holden Deleuran A, Gengnagel C. The Challenge of the bespoke: Design, Simulation and Optimisation of a Computationally Designed Plywood Gridshell. I Thompson EM, red., In Fusion: Proceedings of the 32nd International Conference on Education and research in Computer Aided Architectural Design in Europe. Bind 2. eCAADe (Education and Research in Computer Aided Architectural Design in Europe) and ITU / YTU. 2014. s. 29-38