Visualising Architectural Lighting Concept with 360° Panoramas

Anette Kreutzberg

Visualising Architectural Lighting Concept with 360° Panoramas

Bidragets oversatte titel: Visualisering af arkitektonisk lysdesign med 360° panoramaer

Anette Kreutzberg

Publikation: Bidrag til bog/antologi/rapport › Konferencebidrag i proceedings › Forskning › peer review

Abstract

This paper presents the establishment and refinement of a visualisation workflow based on initial learnings from introducing mobile Virtual Reality (VR) as representational medium for visualising and visually evaluating architectural
lighting concepts using rendered 360° panoramas. Four student projects are
described, each with a different aim and approach towards visualising
architectural light in space: Two projects aiming at conveying reality with
physically based lighting simulations and two projects with an artistic approach
to conveying light impressions. The 360° panoramas were used at low resolution
during the design process to qualify the projects, and the final panoramas were
presented with great success as a supplement to visualisations, diagrams,
technical drawings and physical models at Bachelor and Master exams. The
benefits of using familiar simulation and render software together with low cost,
accessible and portable VR HMD's in the authors opinion far outweighs the
reduced Field of View, lower frame-rate, lack of parallax and dynamic Point of
View compared to realtime rendered high end VR.

Bidragets oversatte titel	Visualisering af arkitektonisk lysdesign med 360° panoramaer
Originalsprog	Engelsk
Titel	Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference
Redaktører	A Kepczynska-Walczak, S Bialkowski
Antal sider	8
Vol/bind	Volume 2
Publikationsdato	2018
Sider	745-752
Status	Udgivet - 2018
Begivenhed	eCAADe 2018: Computing for a better tomorrow - Faculty of Civil Engineering, Architecture and Environmental Engineering, Lodz University of Technology, Poland., Lodz, Polen Varighed: 19 sep. 2018 → 21 sep. 2018 Konferencens nummer: 36 http://www.ecaade.org/prev-conf/archive/ecaade2018/www.ecaade2018.p.lodz.pl/index.html http://www.ecaade2018.p.lodz.pl/

Konference

Konference	eCAADe 2018
Nummer	36
Lokation	Faculty of Civil Engineering, Architecture and Environmental Engineering, Lodz University of Technology, Poland.
Land/Område	Polen
By	Lodz
Periode	19/09/2018 → 21/09/2018
Internetadresse	http://www.ecaade.org/prev-conf/archive/ecaade2018/www.ecaade2018.p.lodz.pl/index.html http://www.ecaade2018.p.lodz.pl/

Emneord

Architectural lighting
360° panorama
Virtual Reality
Visualisation workflow

Kunstnerisk udviklingsvirksomhed (KUV)

Nej

Adgang til dokumentet

http://papers.cumincad.org/cgi-bin/works/paper/ecaade2018_230

1 Organisation af og deltagelse i konference
1 Foredrag og mundtlige bidrag

Visualising Architectural Lighting Concept with 360° Panoramas
Kreutzberg, A. (Foredragsholder)
21 sep. 2018
Aktivitet: Tale eller præsentation › Foredrag og mundtlige bidrag
eCAADe 2018
Kreutzberg, A. (Deltager)
19 sep. 2018 → 21 sep. 2018
Aktivitet: Deltagelse i eller arrangement af en begivenhed › Organisation af og deltagelse i konference

Citationsformater

@inproceedings{82625c1ff8ec48239d941c3b6b506a08,

title = "Visualising Architectural Lighting Concept with 360° Panoramas",

abstract = "This paper presents the establishment and refinement of a visualisation workflow based on initial learnings from introducing mobile Virtual Reality (VR) as representational medium for visualising and visually evaluating architectural lighting concepts using rendered 360° panoramas. Four student projects are described, each with a different aim and approach towards visualising architectural light in space: Two projects aiming at conveying reality with physically based lighting simulations and two projects with an artistic approach to conveying light impressions. The 360° panoramas were used at low resolution during the design process to qualify the projects, and the final panoramas were presented with great success as a supplement to visualisations, diagrams, technical drawings and physical models at Bachelor and Master exams. The benefits of using familiar simulation and render software together with low cost, accessible and portable VR HMD's in the authors opinion far outweighs the reduced Field of View, lower frame-rate, lack of parallax and dynamic Point of View compared to realtime rendered high end VR.",

keywords = "Architectural lighting, 360° panorama, Virtual Reality, Visualisation workflow",

author = "Anette Kreutzberg",

year = "2018",

language = "English",

volume = "Volume 2",

pages = " 745--752",

editor = "A Kepczynska-Walczak and S Bialkowski",

booktitle = "Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference",

note = "eCAADe 2018 ; Conference date: 19-09-2018 Through 21-09-2018",

url = "http://www.ecaade.org/prev-conf/archive/ecaade2018/www.ecaade2018.p.lodz.pl/index.html, http://www.ecaade2018.p.lodz.pl/",

}

TY - GEN

T1 - Visualising Architectural Lighting Concept with 360° Panoramas

AU - Kreutzberg, Anette

N1 - Conference code: 36

PY - 2018

Y1 - 2018

N2 - This paper presents the establishment and refinement of a visualisation workflow based on initial learnings from introducing mobile Virtual Reality (VR) as representational medium for visualising and visually evaluating architectural lighting concepts using rendered 360° panoramas. Four student projects are described, each with a different aim and approach towards visualising architectural light in space: Two projects aiming at conveying reality with physically based lighting simulations and two projects with an artistic approach to conveying light impressions. The 360° panoramas were used at low resolution during the design process to qualify the projects, and the final panoramas were presented with great success as a supplement to visualisations, diagrams, technical drawings and physical models at Bachelor and Master exams. The benefits of using familiar simulation and render software together with low cost, accessible and portable VR HMD's in the authors opinion far outweighs the reduced Field of View, lower frame-rate, lack of parallax and dynamic Point of View compared to realtime rendered high end VR.

AB - This paper presents the establishment and refinement of a visualisation workflow based on initial learnings from introducing mobile Virtual Reality (VR) as representational medium for visualising and visually evaluating architectural lighting concepts using rendered 360° panoramas. Four student projects are described, each with a different aim and approach towards visualising architectural light in space: Two projects aiming at conveying reality with physically based lighting simulations and two projects with an artistic approach to conveying light impressions. The 360° panoramas were used at low resolution during the design process to qualify the projects, and the final panoramas were presented with great success as a supplement to visualisations, diagrams, technical drawings and physical models at Bachelor and Master exams. The benefits of using familiar simulation and render software together with low cost, accessible and portable VR HMD's in the authors opinion far outweighs the reduced Field of View, lower frame-rate, lack of parallax and dynamic Point of View compared to realtime rendered high end VR.

KW - Architectural lighting

KW - 360° panorama

KW - Virtual Reality

KW - Visualisation workflow

M3 - Article in proceedings

VL - Volume 2

SP - 745

EP - 752

BT - Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference

A2 - Kepczynska-Walczak, A

A2 - Bialkowski, S

T2 - eCAADe 2018

Y2 - 19 September 2018 through 21 September 2018

ER -

Visualising Architectural Lighting Concept with 360° Panoramas

Abstract

Konference

Emneord

Kunstnerisk udviklingsvirksomhed (KUV)

Adgang til dokumentet

Aktiviteter

Visualising Architectural Lighting Concept with 360° Panoramas

eCAADe 2018

Citationsformater